April 7, 2016

Snow Plow with truck

The plow burst through the guardrail after being hit.

Story highlights

The plow driver survived the crash with serious injuries
The truck driver is cited for improper passing, failure to maintain lane
The crash was captured on dashcam video by another driver

The plow driver, identified by UDOT as Terry Jacobson, survived the Thursday crash and is hospitalized with serious injuries in Provo's Utah Valley Hospital. He has been with the department for more than 23 years.

Photos of the aftermath show the front of the plow and passenger side of the cab smashed. UDOT spokesman John Gleason told CNN that Jacobson was wearing his seat belt, "which saved his life."

"He says he doesn't remember very much other than going through the rail and rolling down the hill, " Neil Lundell, a UDOT supervisor, said in a video uploaded to the department's YouTube account.

Utah Highway Patrol did not identify the driver of the tractor-trailer but said they cited him for improper passing and failure to maintain lane.

In the dashcam video, recorded by another driver, the tractor-trailer appears to pass Jacobson's plow as it cleared slush on a snowy US Route 6 near Spanish Fork, Utah. Gleason said the truck driver "was temporarily blinded by the wash of the plow and couldn't see where he was going."

The tractor-trailer struck the wing of the plow, causing the plow to cross the highway, blow through the guardrail and continue more than 300 feet down to the canyon.

The truck driver stopped after the collision and called authorities.

UDOT released the dashcam video in an effort to remind drivers to be extra cautious around snowplows.

"This was by far and away the most serious crash we've had with one of our snowplows, " said UDOT executive director Carlos Braceras, in the video uploaded to YouTube. "This is the fourth one that we've had so far this year."

UDOT confirmed to CNN the authenticity of the video, despite the incorrect date-stamp on it. The department said the owner of the dashcam incorrectly set the date and time.